The coiling characteristics and methods of springs are divided into cold coiling method and hot coiling method. Cold winding method: When the diameter of the ...

Medium convex helical compression spring. Both ends of this type of spring have smaller coils and can be embedded in the middle coil, so a larger amount of ...

Disc spring characteristics: short stroke, large load, small space required, easy combination and use, easy maintenance and replacement, economical and high ...

The more commonly used shaft clamps (STW) and hole clamps (RTW), the domestic mainland production mainly uses 65MN spring steel.

The circlip is also called a retaining ring or a retaining ring, which belongs to a type of fastener. It is installed in the shaft groove or hole groove of the ...

The pressure reducing valve is a type of fully automatic valve, which is a type of regulating valve. It is a throttle valve that uses the opening and closing ...

At present, mobile phone brackets on the market are equipped with springs in two brackets that can generate relative displacement, and are placed on the ...

Locating pins are the most widely used in molds. Including stamping molds, injection molds and so on. Their precision is very high, and if it is only by bolts ...

The spring probe needle material is generally selected as Becu or SK. Both have advantages and disadvantages. Becu has good conductivity, but lacks hardness, ...

A serpentine spring refers to a "Z" or "S" shaped spring made of hard spring steel wire, which is mostly used in car seat cushions or mattresses, rather than ...