- Spring outer diameter: Custom
- Spring inner diameter: Custom
- Free height: Custom
- Whether standard parts: non-standard parts
- Material: Custom
- Steel wire diameter: Custom
- Pitch: Custom
- Rotation: a variety of options
- Shape: Custom
- Compressive strength limit: Custom
- Surface treatment: on anti-rust oil
- Load: Custom
- Times of use: 50000
- Clamping height: 1.8 (mm)
OEM Cnc Turning Stainless Steel Flat Square Shaft
The CNC turning machine has a structural layout designed according to the characteristics of the latest CNC machine tools. The bed is inclined at 30°, and the large pallet and the tool table are inclined, which makes the machine tool pleasant to operate and convenient for chip removal. Both the line rail and the lead screw are imported precision and high rigidity line rails from Taiwan, with high rigidity, high precision, low resistance, smooth transmission, low noise, low temperature rise and long service life.
The front and rear bearings of the main shaft adopt paired angular contact bearings to obtain high precision and high speed. The new type of environmental protection fully enclosed shield, high-speed, large-volume cutting, so that no water leaks. The shape of the cover is simple, beautiful and fashionable. Adopt advanced centralized automatic lubrication device, timing, quantitative automatic intermittent lubrication, stable and reliable work.
CNC system control, the main shaft is controlled by a separate servo motor, and the X axis/Z axis is fed by a servo motor at the same time. The new hydraulic chuck clamping method is adopted, the forward and reverse rotation is not loose, the wear resistance is not easy to be damaged, the operation is simple, fast and reliable. The machine tool has a high degree of automation, which can reduce labor intensity. Shorten the product manufacturing process chain and improve production efficiency.
It has the function of fast cutting polyhedron, and realizes the compound machining technology of high-efficiency machining of slate, triangle, tetrahedron, hexagon, octahedron, taper polyhedron, step polyhedron and spherical polyhedron.
Turn-milling composite machining can realize all or most of the machining processes in one loading, thus greatly shortening the product manufacturing process chain. In this way, on the one hand, the production auxiliary time caused by the change of the loading card is reduced, and at the same time, the manufacturing cycle and waiting time of the tooling and fixture are also reduced, which can significantly improve the production efficiency.
The CNC car square machine is suitable for the machining and manufacturing of bulk parts such as aerospace, automobiles, motorcycles, agricultural machinery, and hardware tools.
Advantages Of OEM Cnc Turning Stainless Steel Flat Square Shaft
- Be-Cu Spring is a hardware spring manufacturer integrating，design and production. With 16 years of rich experience, its products are widely used in various industries such as mechanical equipment and electrical switches.
- Be-Cu Spring has a professional engineering team, and the technical engineer team has an average industry experience of more than 10 years. It focuses on innovative development of green and environmentally friendly products, and is committed to high-quality product quality.
- Focusing on the research and development of the production customization of fatigue-resistant springs, using imported raw materials from Japan, and strictly controlling the low-temperature tempering time in the production process, the service life of springs has increased by more than 20% compared with the same industry.
- Be-Cu Spring has a strict inspection system. Quality inspectors measure various indicators of the product in each process. The yield rate is controlled above 99.8%, and it has obtained international ISO certification.
- The spring has undergone surface strengthening treatment to remove surface impurities, which can make the surface structure stronger, smoother, and rust-proof. The effect is better and the service life of the spring is prolonged.
- The maximum frequency is hundreds of times per minute, suitable for the matching use of high-quality mechanical molds, and can meet the requirements of different customers
Specifications Of Cnc Turning Stainless Steel Flat Square Shaft
|Cylindrical/Barrel/Open at both ends/Shrink at both ends/Conical/Hourglass/Closed at both ends/Both ends are ground/Fixed pitch/Variable pitch/Both ends are not ground
|Wire Diameter Specification
|0. 08 ~ 8.0mm
|Blackened/Galvanized/Nickel Plated/Shot Peening/Polishing/Dacromet/Anti-rust Oil/Electrolytic Polishing/Teflon Spray/Spray Paint
|The Uses Of Metal Spring
|The Color Of Metal Spring
|Lean Manufacturing Processes
|Accurate Dynamometers and Projectors for Perfect Size
|Various Materials To Meet Your Performance Requirements:Carbon Spring Wire SWC / Nickel-plated wire, galvanized wire / Piano wire SWPB / Copper wire, phosphor copper wire, beryllium copper wire / Stainless steel wire SUS301, SUS302, SUS304, SUS316, SUS631 /Square wire, flat wire, semi-circle wire / 65Mn _ / Alloy wire /82B / Other special specification steel wire /55CrSi （SWOSC-V） etc.,
|Strong Packaging Is Not afraid of damage during transportation