- Spring outer diameter: Custom
- Spring inner diameter: Custom
- Free height: Custom
- Whether standard parts: non-standard parts
- Material: Custom
- Steel wire diameter: Custom
- Pitch: Custom
- Rotation: a variety of options
- Shape: Custom
- Compressive strength limit: Custom
- Surface treatment: on anti-rust oil
- Load: Custom
- Times of use: xxx
- Clamping height: xxx
OEM Special Non-Standard Mobile Phone Holder Metal Spring
Nowadays, with the rapid development of smart phones, mobile phone brackets are widely used in people’s lives. At present, mobile phone brackets on the market are equipped with springs in two brackets that can generate relative displacement, and are placed on the mobile phone through the spring pairs. The mobile phone in the bracket provides the clamping force, but it is necessary to put the spring into the bracket first and install the baffle on it. The baffle is used to block the spring and provide the bottom plate that fits with the mobile phone during use. This step is cumbersome and difficult to install. Requires baffles and screws, resulting in more parts. Pintejin produces and customizes a mobile phone bracket that is easy to install springs for customers. The installation of springs is relatively simple, and the convex sleeve is fixed by plugging, which is convenient for overall assembly, small in size and few parts.
Advantages Of OEM Mobile Phone Holder Metal Spring
- Be-Cu Spring is a hardware spring manufacturer integrating，design and production. With 16 years of rich experience, its products are widely used in various industries such as mechanical equipment and electrical switches.
- Be-Cu Spring has a professional engineering team, and the technical engineer team has an average industry experience of more than 10 years. It focuses on innovative development of green and environmentally friendly products, and is committed to high-quality product quality.
- Focusing on the research and development of the production customization of fatigue-resistant springs, using imported raw materials from Japan, and strictly controlling the low-temperature tempering time in the production process, the service life of springs has increased by more than 20% compared with the same industry.
- Be-Cu Spring has a strict inspection system. Quality inspectors measure various indicators of the product in each process. The yield rate is controlled above 99.8%, and it has obtained international ISO certification.
- The spring has undergone surface strengthening treatment to remove surface impurities, which can make the surface structure stronger, smoother, and rust-proof. The effect is better and the service life of the spring is prolonged.
- The maximum frequency is hundreds of times per minute, suitable for the matching use of high-quality mechanical molds, and can meet the requirements of different customers
Specifications Of Mobile Phone Holder Metal Spring
| Structural Features | Cylindrical/Barrel/Open at both ends/Shrink at both ends/Conical/Hourglass/Closed at both ends/Both ends are ground/Fixed pitch/Variable pitch/Both ends are not ground |
| Wire Diameter Specification | 0. 08 ~ 8.0mm |
| Surface Treatment | Blackened/Galvanized/Nickel Plated/Shot Peening/Polishing/Dacromet/Anti-rust Oil/Electrolytic Polishing/Teflon Spray/Spray Paint |
| The Uses Of Metal Spring | Multipurpose |
| The Color Of Metal Spring | Customized |
| Lean Manufacturing Processes | Accurate Dynamometers and Projectors for Perfect Size |
| Various Materials | Various Materials To Meet Your Performance Requirements:Carbon Spring Wire SWC / Nickel-plated wire, galvanized wire / Piano wire SWPB / Copper wire, phosphor copper wire, beryllium copper wire / Stainless steel wire SUS301, SUS302, SUS304, SUS316, SUS631 /Square wire, flat wire, semi-circle wire / 65Mn _ / Alloy wire /82B / Other special specification steel wire /55CrSi （SWOSC-V） etc., |
| Firmly Packaged | Strong Packaging Is Not afraid of damage during transportation |
