Stainless Steel Flat Wire Spring

2022-05-17

130 Views 0

SaveSavedRemoved 0

OEM Stainless Steel Flat Wire Spring Shop

Size: wire diameter 0.08mm~8.0mm
Material: 304, 302, 301, 316, 631, 65Mn, 70, 80, T8A, T9A, 60Si2Mn, 55CrSi, 50CrVA, beryllium copper, brass, red copper, phosphor bronze, high temperature resistance, corrosion resistance, memory alloy, etc.
Surface treatment: blackening, zinc plating, nickel plating, shot peening, polishing, dacromet, anti-rust oil, electrolytic polishing, Teflon spraying, etc.

To customize a Flat Wire Spring , you need to provide the following necessary parameter information:

Wire diameter d: mm	(Description: the diameter of the spring wire, the rectangle is length x width)
Outer diameter D2: mm	(Description: the diameter of the outer circle of the spring)
Length L0: mm	(Note: the free height of the spring)
Number of laps Na: lap	(Note: the total number of turns of the spring)
To customize a Flat Wire Spring , you also need to provide the following technical requirements:
turn around:	(Description: Left/Right)
Material requirements:	(Such as: stainless steel wire SUS, carbon steel wire SWC, piano wire SWP, copper wire…etc.)
Surface treatment:	(Description: blackening galvanizing nickel plating chrome plating baking paint powder spraying electrophoresis shot peening Dacromet electropolishing…etc.)
Terminal form:	(Description: and tighten smooth and tighten and smooth)
Strength requirements:	(Description: elastic properties, other technical requirements, etc.)

Be-Cu Spring is a hardware spring manufacturer integrating，design and production. With 16 years of rich experience, its products are widely used in various industries such as mechanical equipment and electrical switches.
Be-Cu Spring has a professional engineering team, and the technical engineer team has an average industry experience of more than 10 years. It focuses on innovative development of green and environmentally friendly products, and is committed to high-quality product quality.
Focusing on the research and development of the production customization of fatigue-resistant springs, using imported raw materials from Japan, and strictly controlling the low-temperature tempering time in the production process, the service life of springs has increased by more than 20% compared with the same industry.
Be-Cu Spring has a strict inspection system. Quality inspectors measure various indicators of the product in each process. The yield rate is controlled above 99.8%, and it has obtained international ISO certification.
The spring has undergone surface strengthening treatment to remove surface impurities, which can make the surface structure stronger, smoother, and rust-proof. The effect is better and the service life of the spring is prolonged.
The maximum frequency is hundreds of times per minute, suitable for the matching use of high-quality mechanical molds, and can meet the requirements of different customers

Structural Features	Cylindrical/Barrel/Open at both ends/Shrink at both ends/Conical/Hourglass/Closed at both ends/Both ends are ground/Fixed pitch/Variable pitch/Both ends are not ground
Wire Diameter Specification	0. 08 ~ 8.0mm
Surface Treatment	Blackened/Galvanized/Nickel Plated/Shot Peening/Polishing/Dacromet/Anti-rust Oil/Electrolytic Polishing/Teflon Spray/Spray Paint
The Uses Of Metal Spring	Multipurpose
The Color Of Metal Spring	Customized
Lean Manufacturing Processes	Accurate Dynamometers and Projectors for Perfect Size
Various Materials	Various Materials To Meet Your Performance Requirements:Carbon Spring Wire SWC / Nickel-plated wire, galvanized wire / Piano wire SWPB / Copper wire, phosphor copper wire, beryllium copper wire / Stainless steel wire SUS301, SUS302, SUS304, SUS316, SUS631 /Square wire, flat wire, semi-circle wire / 65Mn _ / Alloy wire /82B / Other special specification steel wire /55CrSi （SWOSC-V） etc.,
Firmly Packaged	Strong Packaging Is Not afraid of damage during transportation